Print Friendly, PDF & Email

Trevoli – UPA 15-10 Hot Water Booster Pump

   UPA_performance_curve

DESCRIPTION

The Trevoli UPA 15-10 is a small stainless steel circulator pump with integrated flow sensor, designed for water pressure boosting in domestic properties to provide additional pressure to hot and cold water taps and similar outlet points.

APPLICATIONS

Suitable for liquid transfer in pressure boosting systems, such as Domestic water supply systems and solar.
Developed for domestic use in homes where inconsistent or low hot water pressures cause problems, especially in bathrooms and laundries. These extremely quiet pumps have particular application in homes equipped with gravity fed hot water system, or simply in situations where low water pressure is experienced.

The UPA15-10 hot water booster pump can be easily installed to new pipework or existing pipework. The pump increases the water pressure so that the flow rate is comfortably high in showers, taps and any other domestic water outlets. A built-in flow switch starts and stops the pump when the tap is turned on and off- (low flow actuated 2.5-3.0 lpm at 2M Head)

When used to boost hot water, the pump will assist in minimising the often annoying change of shower water temperature when someone else at home uses another hot water outlet. Furthermore, there is much less waiting time for hot water to appear in the shower or other water outlet when the hot tap is turned on.

TECHNICAL DATA

Mains voltage: 240v 50Hz
Enclosure class: IP42
Insulation class: F
Duty rating: Continuous
Liquid temperature range: 0-70° C
Maximum ambient temperature: 40° C
Maximum operating pressure: 10 bar
Port to port dimensions: 160mm
Port size: 20mm BSP thread
Unions: Brass 15mm

ELECTRICAL DATA

Mains voltage: Single phase 240v 50Hz
Input Power: 100 W

PERFORMANCE DATA

Maximum Flow Rate: 45 L/m
Maximum Head: 10m

FEATURES

Maintenance-free
Low noise
Low energy consumption
Corrosion-resistant stainless steel pump housing
Comes with two Brass Unions (20mm/15mm)
Comes with 1/2 inch brass non-return valve and nipple

PUMPED LIQUID

UPA circulator pumps are suitable for the following liquids:

  • Clean, thin, non-aggressive and non-explosive
  • liquids without solid particles or fibres
  • Cooling liquids, not containing mineral oil
  • Softened water.

 

Size

 UPS_size
Model
L
H1
H2
B1
B2 
G
UPA 15-10
160
20 125 50 50 25